Main Article Content
Abstract
Increasing Exploration of river sand push an action to find other aternative excepting river sand. Using of sea sand become alternative as fine aggregate mixed on making of concrete. The research is conducted to know the effect of fine aggregate mixed to concrete compressive strength. Two kinds of fine aggregate used are river sand (PS) from Pondok Kelapa and sea sand from Lais, which is all bad gradation. Coarse Aggregates used are from quarry Sukaraja and quarry Pondok Kubang. Sea sand consists of two conditions which is not washed (PLTC) and washed (PLC) without regard to content of its mud. Number of samples was 42 samples which were cylindrical in shape with diameter of 15 cm and height of 30 cm. The research carried out by combined 65% PS + 35% (PLC or PLTC) and 75% PS + 25% (PLC or PLTC) then compared it to concrete of comparison. Test of concrete compressive strength was performed at 28 days. The result showed that the greatest concrete compressive strength was 16,88 MPa occured on a mixture of 75% PS + 25% PLTC using coarse aggregate from Sukaraja. Mixture of 75% PS + 25% PLTC using coarse aggregate from Sukaraja increased concrete compressive strength of 5,47 MPa (+47,93%) to concrete of comparison using 100% PLTC and 4,05 MPa (+24,02%) to concrete of comparison using 100% PS.
Article Details
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
How to Cite
Gunawan, A. (2019). PENGARUH CAMPURAN DUA AGREGAT HALUS TERHADAP KUAT TEKAN BETON. Inersia: Jurnal Teknik Sipil, 6(1), 61–72. https://doi.org/10.33369/ijts.6.1.61-72
References
- Amri, S., 2005, Teknologi Beton A-Z, Yayasan John Hi-Tech Idetama,
- Jakarta.
- Mulyono, T., 2003, Teknologi Beton, Fakultas Teknik UNJ, Jakarta.
- Nugraha, P., 2007, Teknologi Beton, CV Andi Offset, Yogyakarta
- SK SNI M-14-1989-F, 1989, Metode Pengujian Kuat Tekan, LPMB, DPU,
- Bandung.
- SK SNI T-15-1990-03, 1990, Tata Cara Pembuatan Rencana Campuran
- Beton Normal, DPU, Bandung.
- SNI 03-2847-2002, 2002, Tata Cara Perencanaan Struktur Untuk
- Bangunan Gedung, BSN.
- Tjokrodimuljo, K., 2007, Teknologi Beton, UGM, Yogyakarta.
References
Amri, S., 2005, Teknologi Beton A-Z, Yayasan John Hi-Tech Idetama,
Jakarta.
Mulyono, T., 2003, Teknologi Beton, Fakultas Teknik UNJ, Jakarta.
Nugraha, P., 2007, Teknologi Beton, CV Andi Offset, Yogyakarta
SK SNI M-14-1989-F, 1989, Metode Pengujian Kuat Tekan, LPMB, DPU,
Bandung.
SK SNI T-15-1990-03, 1990, Tata Cara Pembuatan Rencana Campuran
Beton Normal, DPU, Bandung.
SNI 03-2847-2002, 2002, Tata Cara Perencanaan Struktur Untuk
Bangunan Gedung, BSN.
Tjokrodimuljo, K., 2007, Teknologi Beton, UGM, Yogyakarta.