Article Sidebar

Submitted
January 24, 2019
Accepted
January 24, 2019
Published
January 24, 2019
Download
PDF
Statistic
Read Counter : 123 Download : 209

Main Article Content

Abstract

This report is the result of the research of the effect of river sand addition to red brick to the shrinkage and the compressive strength of the red brick. The production ofred bricks was done in brick factory in Talang Kering Kota Bengkulu. River sand derived from Taba Penanjung. The composition of the sand used was 0%, 5%, 10%, 15%, 20%, 25%, 30% of the weight of clay with the mold size of 10,5 cm x 21cm x 5 cm. The sample used for shrinkage sample is also used for compressive strength test as many as 140 pieces.Compressive strengthtesting refers to the SNI 03-4164-1996 and use compression tool hand operated machine with a capacity of 250kN. Compressive strength testing performed after the red brick with capping is7 days old. Mortar is made with a ratio of 1: 3 using the mount sandto produce mortar with compressive strength of 3,18 MPa. The results showed thatthe brick color is dominant yelloworange with lack of smooth surface and sharp edge. Depreciation smallest volume and weight of each of the addition of 30% amounting to 34,2% and 28,87%. Depreciation largest volume and weight of each of the addition of 15% sand by 39,7% and amounted to 32,96% without sand.Most powerful press red brick on the addition of 5% sand by 1,72MPa and the smallest on the addition of 30% sand at 1,24MPa. The resulting maximum compressive strength less than 2,5MPa so it does not meet the SII-0021-978.

Article Details

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
How to Cite
Herlina, F., Elhusna, E., & Islam, M. (2019). PENGARUH PENAMBAHAN PASIR SUNGAI PADA BATA MERAH TERHADAP KUAT TEKAN DAN PENYUSUTAN DI TALANG KERING KOTA BENGKULU. Inersia: Jurnal Teknik Sipil, 7(1), 15–22. https://doi.org/10.33369/ijts.7.1.15-22
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Burhanuddin, 2013, StudiPenyimpangan Ukuran Bata Merah, Jurnal Teknosains, Vol. 7, pp. 231-236, UIN AlauddinMakassar.
  2. Elhusna, Wahyuni, A., S., dan Gunawan, A., 2014, Performance
  3. of Clay Brick of Bengkulu, Procedia Engineering, Vol. 95, pp.504-509.
  4. Elianora, Shalahuddinn M. danAljirzaid, 2010, Variasi Tanah Lempung, Tanah Lanau, dan Pasir sebagai Bahan Campuran Batu Bata, Jurnal Teknobiologi, Fakultas Teknik, Universitas Riau, Pekanbaru.
  5. Huda, M. dan Hastuti, E., 2012, Pengaruh Temperatur Pembakaran dan Penambahan Abu terhadap Kualitas Batu Bata, Jurnal Neutrino Vol. 4, Jurusan Fisika, Fakultas Sains dan Teknologi UIN Maliki, Malang.
  6. Muhardi, Suryanita, R. dan Alsaidi,2007, Perbaikan Karakteristik Batu Bata Lempung dengan Penambahan Abu Terbang, Jurnal Teknik Sipil, Fakultas Teknik Universitas Riau, Riau.
  7. Rochadi, M. dan Irianta, F.X.G., 2007, Kualitas Bata Merah dari
  8. Pemanfaaatan Tanah Bantaran Sungai banjir Kana Timu, Jurnal
  9. Wahana teknik Sipil, Jurusan Teknik Sipil, Politeknik Negeri
  10. Semarang, Semarang.
  11. Rosalia, D., Elhusna, dan Gunawan, A, 2013, Kajian Pengaruh
  12. Penambahan Abu Cangkang Sawit terhadap Kuat Tekan Bata
  13. Merah, Jurnal Inersia Vol. 5, Jurusan Teknik Sipil, Fakultas
  14. Teknik, Universitas Bengkulu, Bengkulu.
  15. Sanjaya, I.P.A., 2009, Pengaruh Jumlah Penggilingan Tanah Liat Sebagai
  16. Bahan Pembuat Genteng Terhadap Karakteristik Genteng
  17. Keramik Darmasaba, Jurnal Ilmiah Teknik Sipil, Vol. 13, Jurusan Teknik Sipil, Fakultas Teknik, Universitas Udayana, Denpasar.
  18. SNI 03-4164-1996, 1996, MetodePengujian Kuat Tekan Dinding
  19. Pasangan Bata Merah di Laboratorium, BSN.
  20. SNI 3422-2008, 2008, Cara Uji Penentuan Batas Susut Tanah, BSN.
  21. Suwardono, 2002, Mengenal Pembuatan Bata, Genteng dan Genteng
  22. Berglasir, CV. Yrama Widya, Bandung.
  23. Wulandari, 2011, Pengaruh Penambahan Serbuk Gergaji
  24. Kayu Jati (Tectona Grandits L.f) pada panduan Tanah Liat dan
  25. Abu Sampah terhadap Kualitas Batu Bata Merah di Kabupaten Karanganyar, Skripsi, Jurusan Fisika, Fakultas Matematika dan
  26. Ilmu Pengetahuan Alam, Universitas Sebelas Maret, Surakarta
  27. Yelizar, R., N., 2014, Analisis Penyusutan dan Kuat Tekan Bata
  28. Merah Pejal Konvensional diKecamatan Selebar dan Muara
  29. Bangkahulu Kota Bengkulu, Skripsi,Jurusan Teknik Sipil, Fakultas Teknik, Universitas Bengkulu, Bengkulu.