Main Article Content
Abstract
This research is a new innovation to find alternative material to replace Portland cement filler by using sea sand. This study examined the effect of sea sand usage on Asphalt Concrete Binder Course (AC-BC) mixture with sea shifting variation of 25%; 50%; 75%, and 100%. This research is an experimental study in laboratory by using Marshall test method in the form of stability, melting, Marshall quotient (MQ), VMA, VFA, and VIM. To support the test results conducted in the laboratory research including physical examination of asphalt, aggregate, and filler. The results of this study obtained the value of Marshall characteristics for the best VMA is at 100% variation of 16.89%; The highest VFA value at 100% variation of 81,78%; The best VIM values are at normal conditions of 4.10%; The best density value in normal condition is 2.35 T/m³; The highest stability value under normal conditions of 1519.23 kg; The best flow rate is in the 25% variation of 4.52 mm; The highest MQ values are in normal condition of 453.21 kg/mm. The use of sea sand as filler in all variations can be used although not all Marshall characteristic variables are high in value compared with normal conditions without replacement. The more sea sand used as filler, the more asphalt content needed in a mixture, in this study the asphalt content increased 2% when compared with the condition without change
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
- Kementerian Pekerjaan Umum Direktorat Jenderal Bina Marga, 2010, Spesifikasi Umum Bidang Jalan dan Jembatan, Revisi 3, Divisi VI , Jakarta.
- Sukirman, S., 1999, Perkerasan Lentur Jalan Raya, Nova, Bandung.
- Suprapto, T., 2004, Bahan dan Struktur Jalan Raya, KMTS FT UGM, Yogyakarta.
- Tenriajeng, A.T., 2007, Rekayasa Jalan Raya-2, Gunadarma, Jakarta.
References
Kementerian Pekerjaan Umum Direktorat Jenderal Bina Marga, 2010, Spesifikasi Umum Bidang Jalan dan Jembatan, Revisi 3, Divisi VI , Jakarta.
Sukirman, S., 1999, Perkerasan Lentur Jalan Raya, Nova, Bandung.
Suprapto, T., 2004, Bahan dan Struktur Jalan Raya, KMTS FT UGM, Yogyakarta.
Tenriajeng, A.T., 2007, Rekayasa Jalan Raya-2, Gunadarma, Jakarta.