Main Article Content
Abstract
This Research is based on the difficulty of implementation of the hole installation centered in the middle column. The influence of shifting the hole to column capacity reduction occurs when the hole is shifted towards to the compression area. This study analizes the effect of shifting the hole in rectangular reinforced concrete column against capacity of the column structure decrease. This calculation consists of 144 samples with different compression strength (fc’),
reinforcements area, hole area, and dimensions of the column. The analysis is based on the assumption of linear strain distribution in cross section with appropriate stress-strain correlation using Hognestaad equation. Reinforced concrete structural element were analyzedonly experiencing a combination of uniaxial bending moment. The results of the analysis effect of shifting the hollow in rectangular reinforced concrete column decreased capacity of the colomn. The largest decline of the column capacity occured on 100% the shift column holes
from the hole centered in the middle column on dimension of 600 mm x 600 mm with fc' 30 MPa, reinforcement quality (fy) 400 MPa, reinforcement extensive of 1%, and holes extensive of 7% is 10.38% of axial forces (Pn) and 9.06% of Nominal Moment (Mn). The effect of shifting the hole towards to the compression area is affecting the capacity of hollow in rectangular reinforced concrete column centric decreasing.
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
- DPU. 2002. SK SNI 03-2847-2002: Tata Cara Perhitungan Struktur Beton
- Untuk Bangunan Gedung. Departemen Pekerjaan Umum Yayasan Badan Penerbit PU, Bandung.
- Park, R. and Paulay, T. 1974, Reinforced Concrete Structures. Departement of Civil Engineering, University of Canterbury, Cristchurch, New Zealand.
- Renaningsih. 2006. Analisis penampang kolom beton bertulang persegi
- berlubang menggunakan PCA-COL. Jurnal Ilmiah Teknik Sipil.
- Renjani, M. S. 2011. Analisis Penampang Kolom Beton Bertulang Persegi
- Berlubang. Universitas Bengkulu, Bengkulu.
- Sudarsana. 2010. Analisis Pengaruh Konfigurasi Tulangan Terhadap
- Kekuatan dan Daktailitas Kolom Beton Bertulang. Jurnal Ilmiah Teknik Sipil.
References
DPU. 2002. SK SNI 03-2847-2002: Tata Cara Perhitungan Struktur Beton
Untuk Bangunan Gedung. Departemen Pekerjaan Umum Yayasan Badan Penerbit PU, Bandung.
Park, R. and Paulay, T. 1974, Reinforced Concrete Structures. Departement of Civil Engineering, University of Canterbury, Cristchurch, New Zealand.
Renaningsih. 2006. Analisis penampang kolom beton bertulang persegi
berlubang menggunakan PCA-COL. Jurnal Ilmiah Teknik Sipil.
Renjani, M. S. 2011. Analisis Penampang Kolom Beton Bertulang Persegi
Berlubang. Universitas Bengkulu, Bengkulu.
Sudarsana. 2010. Analisis Pengaruh Konfigurasi Tulangan Terhadap
Kekuatan dan Daktailitas Kolom Beton Bertulang. Jurnal Ilmiah Teknik Sipil.