Article Sidebar

Submitted
January 28, 2019
Accepted
January 28, 2019
Published
January 29, 2019
Download
PDF
Statistic
Read Counter : 370 Download : 1444

Main Article Content

Abstract

Installation of pipes (conduit) in the building columns often found in reinforced concrete structures. The installation of pipes inside the columns is utilized as sanitary and mechanical electrical pipes. The case research in this study is to analyze the rectangular column with the applied research type (applied/pratical research). This research aims to analyze the impact of the holes on square rectangular columns. This calculation consists of 675 samples with different
concrete compression strength (f'c), reinforcement area, holes area, and the dimensions of the column. Analysis of the calculation of hollow rectangular columns using the stress-strain relationship equation developed by Hognestaad. The results of the analysis on hollow rectangular columns resulted in a decrease column capacity. The largest decrease of the rectangular column capacity occurred on holes area of 7%, with concrete compression strength 30 MPa, and dimensions of the column 450 x 1800 mm which is 16.97%.

Article Details

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
How to Cite
Marzon, M., Islam, M., & Elhusna, E. (2019). ANALISIS PENAMPANG KOLOM BETON BERTULANG PERSEGI PANJANG BERLUBANG. Inersia: Jurnal Teknik Sipil, 10(2), 1–12. https://doi.org/10.33369/ijts.10.2.1-12
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Asroni, A., 2010, Kolom, Fondasi & Balok T Beton Bertulang, Yogyakarta: Graha Ilmu.
  2. Badan Standardisasi Nasional (BSN), 2013, Persyaratan Beton Struktural untuk Bangunan Gedung (SNI-2847-2013).
  3. Inasari, Edy., 2014, Penelitian Dan Metode Ilmiah, https://inasari894.wordpress.com/2014/0 4/06/penelitian-dan-metode ilmiah/, 12 November 2017, 20.16 WIB.
  4. Karsidi, R., 2007, Sosiologi Pendidikan, Surakarta: UNS Pres
  5. Nawy, E. G., 1998, Beton Bertulang Suatu Pendekatan Dasar, Bandung: Refika Aditama.
  6. Park, R. And Pauly, T., 1974, Reinforced Concrete Structures, Departement Of Civil Engineering, University Of Canterbury, Cristchurch, New Zealand.
  7. Renaningsih, 2006, Analisis Penampang Kolom Beton Bertulang Persegi Berlubang Menggunakan PCA-COL, Jurnal Ilmiah Teknik Sipil.
  8. Renjani, M. S., 2011, Analisis Penampang Kolom Beton Bertulang Persegi
  9. Berlubang¸ Bengkulu: Universitas Bengkulu.
  10. Sudarsana, 2010, Analisis Pengaruh Konfigurasi Tulangan terhadap
  11. Kekuatan dan Daktailitas Kolom Beton Bertulang, Jurnal Ilmiah Teknik
  12. Sipil.
  13. Wahyudi, L. dan Rahim, Syahril A., 1997. Struktur Beton Bertulang, Jakarta: PT Gramedia Pustaka Utama.