PENGARUH PROSES PENGADUKAN TANAH LIAT TERHADAP KUAT TEKAN BATA MERAH

Yovanda Putra Medika(1), Elhusna Elhusna(2), Ade Sri Wahyuni(3),
(1) Universitas Bengkulu, Indonesia
(2) Universitas Bengkulu, Indonesia
(3) Universitas Bengkulu, Indonesia

Abstract


One of the conventional brick production processes is the clay stirring process, which the red brick clay mortar mix is, done by stepping on it. This research is aimed to know the duration of stepping on the process of the clay mortar mixing to the red brick properties. The method of this research is experimental. The brick making process is done in the way that the factory does. The variation of stepping on brick dough is about 20, 25, 30, 32, 35 and 40 minutes where 32
minutes is factory time. The objects of the test created on this research is 15 for normal bricks and 90 for variation bricks. The testing of the compressive strength of the brick refers to SNI 03-416-1996 and uses the Compression Machine Hand Operated with capacity 250 kN. The biggest of of the compressive strength of the brick is on stepping on brick dough in 40 minutes with 1,09 MPa. This research shows that the length of the stirring process determines the strength of the produced bricks; simply put, the longer the stirring process gets, the stronger bricks become.


Full Text:

PDF

References


Abdurrohmansyah., Adha, I., Ali, H., 2015, Studi Kuat Tekan Batu Bata

menggunakan Bahan Additive (Abu Sekam Padi, Abu Ampas Tebu dan

Fly Ash) Berdasarkan Spesifikasi Standar Nasional Indonesia (SNI),

JRSDD Vol.3, No.3, Jurusan Teknik Sipil, Fakultas Teknik, Universitas

Lampung.

Amin M., 2015, Inovasi Material pada Pembuatan Bata Merah Tanpa

Dibakar untuk Kemakmuran Industri Kerakyatan, UPT Balai Pengolahan

Mineral Lampung-LIPI, Jl. Ir. Sutami KM.15 Tanjung Bintang Lampung

Selatan.

Andayono T., 2017, Kualitas Batu Bata Pasca Sosialisasi Persyaratan Pokok Membangun Rumah Lebih Aman Gempa, Jurusan Teknik Sipil, Fakultas Teknik Universitas Negeri Padang.

Handayani S., 2010. Kualitas Batu Bata Merah dengan Penambahan Serbuk Gergaji, Jurnal Teknik Sipil Vol. 12, Jurusan Teknik Sipil, Fakultas Teknik, Universitas Negeri Semarang, Semarang.

Raharjo, M.T., Sumarni, S., Rahmawati, A., 2015, Pengaruh Penggunaan Abu Vulkanik sebagai Pengganti Sebagian Tanah Liat pada Batu Bata terhadap Kuat Tekan, Berat Jenis dan Daya Resapan Air sebagai Pendalaman Materi Konstruksi Bangunan di SMK Teknik Bangunan, Jurusan Pendidikan Teknik Kejuruan, Universitas Sebelas Maret.

Rahman, H., Wisnumurti, Zacoeb, A., 2016, Uji Kuat Tekan Bata Merah

Menggunakan Mortar Pasir Kwarsa, Jurusan Teknik Sipil, Fakultas Teknik,

Universitas Brawijaya Malang, Jalan MT. Haryono 167 Malang 65145, Jawa

Timur




DOI: https://doi.org/10.33369/ijts.10.2.29-34

Article Metrics

 Abstract Views : 0 times
 PDF Downloaded : 0 times

Refbacks

  • There are currently no refbacks.


INERSIA indexed by :

   

INERSIA
Jurnal Teknik Sipil

Program Studi Teknik Sipil, Fakultas Teknik Universitas Bengkulu
Jln. W.R. Supratman, Kandang Limun, Bengkulu
Tlp.+62736-344087, 21170, Ext. 337, Fax +62736-349134
Email: inersia@unib.ac.id


ISSN 2086-9045

View My Stats