Main Article Content

Abstract

Valves is the part in an engine determining engine performance. The setting of the valves is to determine the composition of air and fuel in their combustion room. The mixing of the air and the fuel is the key of the engine performance. Dinamometer test was being conducted for the gap variation of the valves of 0.03 mm, 0.05 mm, and 0.07 mm each either for inhaust valve and exhaust one. The optimum of the engine performance of gasoline fuel as measured from the torque, the power, and the specific fuel consumption was at 0.05 mm of both.

Keywords

Gap Valve Torsion Power Specific Fuel Consumption

Article Details

Author Biography

Angky Puspawan, Mechanical Engineering University of Bengkulu

Energy Conversion

References

  1. Basyirun, dkk. 2008. Bahan Ajar Konversi Energi. Semarang
  2. Jama J dkk. 2008. Teknik Sepeda Motor Jilid 1. Jakarta
  3. Arismunandar W. 1998. Penggerak Mula Motor Bakar Torak. ITB. Bandung
  4. Anonim. Nd. Buku Pelatihan Mekanik Tingkat 3, PT. AHM Astra Honda Motor
  5. Anonim. Nd.Katalog Honda, PT. AHM Astra Honda Motor.
  6. Cengel AY, Boles MA. 1999. Thermodynamics An Engineering Approach. Mc Graw-Hil. New York
  7. Pulkrabek WW. 1998. Internal Combustion Engin. lnc, Second edition. USA .
  8. Purwanto, Heru. 2012. Perbandingan Penggunaan Bahan Bakar Premium dan Pertamax Terhadap Ujuk Kerja Mesin Sepeda Motor Honda Supra Fit Tahun 2004. Unversitas Bengkulu.
  9. Azir M, Fuad. 2012. Pengaruh Jarak Elektroda Busi Terhadap Parameter-parameter Performa Motor Bakar. Unversitas Bengkulu.
  10. Sampurno, Sarif dkk. 2010. Pengaruh Variasi Penyetelan Celah Katup Masuk Terhadap Efisiensi Volumetrik Rata-rata Pada Motor Diesel Isuzu Panther C 223 T. Semarang: Universitas Negeri Semarang.