Main Article Content
Abstract
Maintenance is the work done on the engine or engine components that are useful for the
improvement of the engine so that the performance of these components operate properly without
any interference from other objects.
By conducting field observations, some of the tools and materials used in the installation
process on a machine Rolling Bearing of 1st and 2nd Crepper Jumbo is fitting tool, lubrication,
bearing fitting tool, different types of hammers and keys and pads kinds of Cylindrical Roller
Bearings. Used bearings have a characteristic density of 7.9 g/cm3, 700 HV10 hardness, modulus
of elasticity 210 kN/mm2, thermal expansion 12•10-6/K and the electrical resistivity of 0.4•10-6
?m.
From the results obtained on the actual cause of damage to bearings in machines Rolling
of 1st and 2nd Crepper Jumbo are due to loading large on the shaft and casing, user/ machine
operation is continuous, and installation errors bearing with a hammer which resulted in damage
due to collisions that hard (sharp impact). Corrective maintenance is the best solution for this
condition without damage and the production process does not stop. In doing bearing maintenance,
maintenance procedures in accordance with the recommended, then a performance rolling bearing
of crepper jumbo goes as expected by the company. Corrective maintenance is planned
maintenance done to improve and enhance the condition of the bearing so as to achieve acceptable
standards.
improvement of the engine so that the performance of these components operate properly without
any interference from other objects.
By conducting field observations, some of the tools and materials used in the installation
process on a machine Rolling Bearing of 1st and 2nd Crepper Jumbo is fitting tool, lubrication,
bearing fitting tool, different types of hammers and keys and pads kinds of Cylindrical Roller
Bearings. Used bearings have a characteristic density of 7.9 g/cm3, 700 HV10 hardness, modulus
of elasticity 210 kN/mm2, thermal expansion 12•10-6/K and the electrical resistivity of 0.4•10-6
?m.
From the results obtained on the actual cause of damage to bearings in machines Rolling
of 1st and 2nd Crepper Jumbo are due to loading large on the shaft and casing, user/ machine
operation is continuous, and installation errors bearing with a hammer which resulted in damage
due to collisions that hard (sharp impact). Corrective maintenance is the best solution for this
condition without damage and the production process does not stop. In doing bearing maintenance,
maintenance procedures in accordance with the recommended, then a performance rolling bearing
of crepper jumbo goes as expected by the company. Corrective maintenance is planned
maintenance done to improve and enhance the condition of the bearing so as to achieve acceptable
standards.
Keywords
Corrective Maintenance
Rolling Bearing
1st and 2nd Crepper Jumbo
Article Details
License
Authors who publish with this journal agree with the following terms:
- Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
How to Cite
Puspawan, A. (2017). Corrective Maintenance Bearing on Rolling Machine of 1st and 2nd Crepper Jumbo (Case Study in PTPN VII of Padang Pelawi Bussines Unit, Seluma Regency, Bengkulu Province). Teknosia, 3(2), 45–51. Retrieved from https://ejournal.unib.ac.id/teknosia/article/view/2890