Article Sidebar

Submitted
January 26, 2019
Accepted
January 26, 2019
Published
January 28, 2019
Download
PDF
Statistic
Read Counter : 116 Download : 105

Main Article Content

Abstract

The study of bearing capacity and buckling behavior of reinforced foamed concrete column under compressive load.The aim of this research is for knowing the bearing capacity and buckling behavior of reinforced foamed concrete column. This research can be used as the base for precast column of reinforced foamed concrete in non engineered building.The samples for the reinforced foamed concrete column have, w/c : 0.5 ; SG: 1.2, and 0.5% in weight percentage . the control sample is a 15x30 cm cylinder. The column is 200 cm in
height.RFC2510 with cross section 25 x 25 has 4?10 mm main bars, and ?8-100 for stirrups. RFC3010 with cross section 30 x 30 has 4?10 mm main bars, and ?8-100 for stirrups. RFC3012 with cross section 30 x 30 has 4?12 mm main bars, and ?8-100 for stirrups. RFC2510-75 with cross section 25 x 25 has 4?10 mm main bars, and ?8-75 for stirrups.The type of load given is the axial load. In this research the average compressive strength is (f’c) 100.038 kg/cm2, the modulus of elasticity (Ec) is 29793.069 kg/cm2, and the average tensile strength (ft) is 9.572 kg/cm2.The capacity of axial load for each column RFC2510, RFC3010, RFC3012, RFC2510-75, is 49.990ton, 70.310 ton, 58.570 ton, and 51.910 ton respectively. The increase of axial load capacity is influenced by dimension and the distance of stirrups in the column sample. However in this research the using of the bigger bar diameter does not influence the axial load to the column sample. The ratio from the lab test to the theory one is less than 1. The suitable factor reduction for reinforced foamed concrete is 0.61

Article Details

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
How to Cite
Mulyadi, M., Abdullah, A., & Bermansyah, S. (2019). PENGARUH KONFIGURASI TULANGAN SENGKANG TERHADAP KAPASITAS GESER DAN POLA KEHANCURAN KOLOM YANG DIBEBANI TEKAN AKSIAL. Inersia: Jurnal Teknik Sipil, 4(2), 25–32. https://doi.org/10.33369/ijts.4.2.25-32
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Abdullah dan Kasuki, T, 2001, Complete Collapse Test of Reinforced Concrete Colomns, Structural Engineering and Mechanics, an Internasional Journal, Vol. 12, No. 2, hal. 157-168.
  2. American Concrete Institute, 2002, Building Code Requirements for Structural Concrete, (ACI 318-2002), American Concrete Institute.
  3. McCormac, Jack C., 2004, Desain Beton Bertulang, Edisi Kelima, Jilid Pertama, Terjemahan Sumargo Ph. D., Erlangga.
  4. Dipohusodo, Istimawan, 1999, Struktur Beton Bertulang : berdasarkan SKSNI T-15-1991-03 Departemen Pekerjaan Umum RI, PT. Gramedia
  5. Pustaka Utama, 1994.
  6. Park, R and T. Paulay, 1975, Reinforced Concrete, John Wiley & Sons, New York.
  7. Schodek, D.L, 1999, Struktur, Edisi Kedua, Terjemahan: Bambang Suryoatmono, Erlangga, Jakarta.