Article Sidebar
Main Article Content
Abstract
Abstrak
Pada penelitian ini dilakukan pembuatan alat uji impak metode Charpy secara digital dengan menggunakan sensor rotary encoder dan mikrokontroler. Uji impak merupakan salah satu metode yang digunakan untuk mengetahui kekerasan, kekuatan serta keuletan material. Untuk mengetahui keakuratan alat uji impak yang telah dibuat maka dilakukan perbandingan antara alat uji impak otomatis dengan alat uji impak manual. Hasil pengujian menunjukkan bahwa alat uji impak digital otomatis yang dirancang memiliki performa yang lebih baik dibandingkan dengan pengujian manual.
Kata kunci: uji impak digital, metode charpy, material polimerArticle Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
- DAFTAR PUSTAKA
- Y. Handoyo, "Perancangan alat uji impak metode charpy kapasitas 100 joule," Jurnal Ilmiah Teknik Mesin Unisma" 45" Bekasi, vol. 1, p. 97950, 2013.
- F. Taheri-Behrooz, M. Shokrieh and H. Abdolvand, "Designing and manufacturing of a drop weight impact test machine," Engineering Solid Mechanics, vol. 1, pp. 69-76, 2013.
- A. Rossoll, C. Berdin, P. Forget, C. Prioul and B. Marini, "Mechanical aspects of the Charpy impact test," Nuclear engineering and design, vol. 188, pp. 217-229, 1999.
- K. Toshiro, Y. Isamu and N. Mitsuo, "Evaluation of dynamic fracture toughness parameters by instrumented Charpy impact test," Engineering Fracture Mechanics, vol. 24, pp. 773-782, 1986.
- R. A. Wullaert, "Applications of the instrumented Charpy impact test," in Impact Testing of Metals, ASTM International, 1970.
- K. Miyashita, T. Takahashi and M. U. N. E. S. A. D. A. Yamanaka, "Features of a magnetic rotary encoder," IEEE Transactions on Magnetics, vol. 23, pp. 2182-2184, 1987.
- N. L. Hancox, "Izod impact testing of carbon-fibre-reinforced plastics," Composites, vol. 2, pp. 41-45, 1971.
- N. Saba, M. Jawaid and M. T. H. Sultan, "An overview of mechanical and physical testing of composite materials," in Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, Elsevier, 2019, pp. 1-12.
- F. Hardiana, H. Budiman and Y. Samantha, "Perancangan Alat Uji Impak Metode Charpy Dan Izod," PROCEEDING STIMA, 2016.
- C. U. Wardani, Y. Samantha and H. Budiman, "Analisis Pengujian Impak Metoda Izod Dan Charpy Menggunakan Benda Uji Alumunium Dan Baja St37," PROCEEDING STIMA, 2016.
- Hasrin, "Analisa Perpatahan Baja ST 60 Yang Dikenai Beban Impak Charfy," in Seminar Nasional Yusuf Benseh Politeknik Negeri Lhokseumawe, Lhokseumawe, Aceh, 2013.
- C. M. Tai, R. K. Y. Li and C. N. Ng, "Impact behaviour of polypropylene/polyethylene blends," Polymer Testing, vol. 19, pp. 143-154, 2000.
References
DAFTAR PUSTAKA
Y. Handoyo, "Perancangan alat uji impak metode charpy kapasitas 100 joule," Jurnal Ilmiah Teknik Mesin Unisma" 45" Bekasi, vol. 1, p. 97950, 2013.
F. Taheri-Behrooz, M. Shokrieh and H. Abdolvand, "Designing and manufacturing of a drop weight impact test machine," Engineering Solid Mechanics, vol. 1, pp. 69-76, 2013.
A. Rossoll, C. Berdin, P. Forget, C. Prioul and B. Marini, "Mechanical aspects of the Charpy impact test," Nuclear engineering and design, vol. 188, pp. 217-229, 1999.
K. Toshiro, Y. Isamu and N. Mitsuo, "Evaluation of dynamic fracture toughness parameters by instrumented Charpy impact test," Engineering Fracture Mechanics, vol. 24, pp. 773-782, 1986.
R. A. Wullaert, "Applications of the instrumented Charpy impact test," in Impact Testing of Metals, ASTM International, 1970.
K. Miyashita, T. Takahashi and M. U. N. E. S. A. D. A. Yamanaka, "Features of a magnetic rotary encoder," IEEE Transactions on Magnetics, vol. 23, pp. 2182-2184, 1987.
N. L. Hancox, "Izod impact testing of carbon-fibre-reinforced plastics," Composites, vol. 2, pp. 41-45, 1971.
N. Saba, M. Jawaid and M. T. H. Sultan, "An overview of mechanical and physical testing of composite materials," in Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, Elsevier, 2019, pp. 1-12.
F. Hardiana, H. Budiman and Y. Samantha, "Perancangan Alat Uji Impak Metode Charpy Dan Izod," PROCEEDING STIMA, 2016.
C. U. Wardani, Y. Samantha and H. Budiman, "Analisis Pengujian Impak Metoda Izod Dan Charpy Menggunakan Benda Uji Alumunium Dan Baja St37," PROCEEDING STIMA, 2016.
Hasrin, "Analisa Perpatahan Baja ST 60 Yang Dikenai Beban Impak Charfy," in Seminar Nasional Yusuf Benseh Politeknik Negeri Lhokseumawe, Lhokseumawe, Aceh, 2013.
C. M. Tai, R. K. Y. Li and C. N. Ng, "Impact behaviour of polypropylene/polyethylene blends," Polymer Testing, vol. 19, pp. 143-154, 2000.