Article Sidebar

Download
pdf

Main Article Content

Abstract

Analysis of power flow in the power system is used to determine the parameters of the system itself. The benefit of the power flow analysis is to determine whether the amount of power in the electric power system still meets the predetermined limits, as well as to determine the number of existing losses, and to obtain the initial conditions for planning the new system. To solve the power flow problem, a power flow simulation can be performed using ETAP software. Simulations were carried out using the Newton-Rhapson method to determine the flow of power during the rainy and dry seasons. The results of the power flow simulation in the rainy season show that the highest active and reactive power values ​​are found in bus 1, namely 156.78 kW and 101.77 kVAR, while the simulation during the rainy season shows the highest active power and reactive power in bus 1, which is 137.85 kW and 88.97 kVAR. Then the highest voltage drop in the rainy season is 3.11% and the dry season is 2.78%. The Newton-Rhapson method requires 2 iterations to reach a convergent value.

Article Details

License

Copyright (c) 2023 Afriyastuti Herawati

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
How to Cite
Herawati, A., Putra, R. U., Handayani, Y. S., & Anggraini, I. N. (2022). Analisis Aliran Daya Pada Sistem Stand Alone Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) Al Hanan Dengan Metode Newton Rhapson. JURNAL AMPLIFIER : JURNAL ILMIAH BIDANG TEKNIK ELEKTRO DAN KOMPUTER, 12(2), 1–7. https://doi.org/10.33369/jamplifier.v12i2.24504
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. REFERENSI
  2. Badan Pusat Statistik, 2021.” Jumlah Penduduk Desa Uludanau”, https://okuselatankab.bps.go.id, diakses pada tanggal 18 september 2021 pukul 21.37
  3. Google Map, 2021.”Jarak Desa Uludanau ke Kota Muaradua”, https://maps.google.co.id, diakses pada tanggal 18 september 2021 pukul 22.00
  4. Harifin, H., Daratha, N., & Rosa, M. K. A, 2020.” Pengembangan Perangkat Lunak Untuk Analisis Aliran Beban Tiga Fasa Pada Jaringan Tegangan Rendah Dengan Metode Newton Berbasis Calculus Wirtinger” dalam JURNAL AMPLIFIER: Jurnal Ilmiah Bidang Teknik Elektro dan Komputer (ISSN: 2089-2020, e-ISSN: 2622-2000, vol.10, no.2 Desember 2020 hal. 20-27). Bengkulu: Universitas Bengkulu
  5. Pradana, Muslim Aziman, 2020.” Rekonfigurasi Jaringan Pada Sistem Jaringan Tegangan Rendah (JTR) Universitas Bengkulu Kandang Limun”. Fakultas Teknik, Universitas Bengkulu, Bengkulu.
  6. Ridwan, Nalsen Pigi, 2017.” Rekonfigurasi Jaringan Pada Sistem Distribusi Jaringan Tegangan Menengah Studi Kasus Penyulang Ekspres Jurusan Kota Kabupaten Kepahiang”. Fakultas Teknik, Universitas Bengkulu, Bengkulu.
  7. Djalal, M. R., Chandra, Y. L., Yunus, M. Y., & Nauwir, H. (2019). Penyelesaian Aliran Daya 37 Bus Dengan Metode Newton Raphson (Studi Kasus Sistem Interkoneksi 150 kV Sulawesi Selatan). Jurnal Teknik Mesin SINERGI (vol.12, no. 1, hal. 35-49).
  8. Otniel, F., Busaeri, N., & Sutisna, S, 2019.” Analisa Aliran Daya Sistem Tenaga Listrik pada Bagian Penyulang 05EE0101A di Area Utilities II PT. Pertamina (Persero) Refinery Unit IV Cilacap Menggunakan Metode Newton Raphson” dalam Journal of Energy and Electrical Engineering (vol. 1, no. 1, Oktober 2019 hal. 1-6). Tasikmalaya: Universitas Siliwangi.
  9. Fikri, M., & Anggaini, D, 2018.” Metode Newton Raphson Untuk Analisa Aliran Daya Jaringan Distribusi 12,66 KV” dalam JURNAL ILMIAH SUTET (ISSN: 2356-1505, e-ISSN: 2656-9175, vol. 8, no. 2, Desember 2018 hal. 114-121). Jakarta: Sekolah Tinggi Teknik PLN.
  10. Saukani, M., Hakim, E. A., & Pakaya, I. 2016.” Analisa Perbandingan Aliran Daya Optimal Mempertimbangkan Biaya Pembangkitan Dan Kestabilan Daya Menggunakan Particle Swarm Optimization Dan Algoritma Genetika”. Dalam Prosiding SENTRA: Seminar Teknologi dan Rekayasa (ISSN: 2527-6042, eISSN: 2527-6050, no. 2, November 2016 hal. 77-82).
  11. Monice, M., Situmeang, U., & Perinov, P. 2019.” Analisis Kontingensi Sistem Tenaga Listrik Riau Menggunakan Metode Aliran Daya Newton Raphson” dalam Prosiding Seminar Nasional Pakar (ISSN: 2615 - 2584 e-ISSN: 2615 – 3343 april 2019). Riau: Universitas Lancang Kuning
  12. Pangloli, K. M., & Ahmad-Gaffar, H, 2020.” Analisis Aliran Daya Menggunakan Metode Fast Decoupled Pada Sisi Tegangan 6.3 KV PT. Semen Tonasa V” dalam SNTEI: Seminar Nasional Teknik Elektro dan Informatika (oktober 2020 hal. 8-14). Makasar: Politeknik Negeri Ujung Pandang