Article Sidebar

Download
PDF

Main Article Content

Abstract

The fishing industry is currently one of the choices of food ingredients for daily needs. In everyday life, we are familiar with salted fish. To process salted fish, the drying process is done manually so fishermen have to directly control the drying of salted fish using 5-6 fishermen and drying salted fish cannot be left alone because salted fish is very vulnerable to rainwater. To minimize damage to salted fish and make fishermen's work easier, technology for automatic drying of salted fish based on the internet of things has been developed. The components used in making this IoT-based salted fish dryer are NodeMcu, rain sensors, light sensors, and servo motors. This research uses experimental methods, this research was carried out on ANTB (Bengkulu Traditional Fishermen's Alliance) on the coast of Bengkulu. The results of the research, the salted fish drying equipment can be controlled remotely using the Blynk Platform with an ON-OF controller, opening the drying roof by detecting the bright light sensor and closing the drying roof by detecting the rain sensor, then monitoring the drying remotely using the Blynk Platform so that it can determine bright conditions by displaying the LDR sensor value and indicator light for the rain sensor.

Keywords

Drying Salted Fish Automatic IoT

Article Details

License

Copyright (c) 2023 Prengki Rahmadan Herwanto, Toibah Umi Kalsum, Hendri Alamsyah

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
How to Cite
Herwanto, P. R., Kalsum, T. U., & Alamsyah, H. (2023). Alat Sistem Penjemur Ikan Asin Otomatis Berbasis IoT (Internet Of Things). JURNAL AMPLIFIER : JURNAL ILMIAH BIDANG TEKNIK ELEKTRO DAN KOMPUTER, 13(2), 101–107. https://doi.org/10.33369/jamplifier.v13i2.31803
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. REFERENSI
  2. M. Hasnan, “Rancang Bangun Sistem Pengering Gabah Dengan Menggunakan Arduino,” Islam Negeri Alauddin Makasar, 2017.
  3. D. A. Rozeff Pramana, Kharisma Ilham, Sapta Nugraha, Muhamad Otong, “Perancangan Perangkatpengering Ikan Otomatisskala Mini,” J. Sustain. J. Has. Penelit. Dan Ind. Terap., Vol. 8, No. 2, Pp. 65–74, 2019, [Online]. Available: Https://Ojs.Umrah.Ac.Id/Index.Php/Sustainable/Article/View/1436/763.
  4. S. I. Desmira, Didik Aribowo, Gigih Priyogi, “Aplikasi Sensor Ldr (Light Dependent Resistor) Untuk Efisiensi Energi Pada Lampu Penerangan Jalan Umum,” J. Prosisko, Vol. 9, No. 1, Pp. 21–29, 2022.
  5. Y. Hendrian And V. S. P. , Yusuf Pribadi Yudatama, “Jemuran Otomatis Menggunakan Sensor Ldr, Sensor Hujan Dan Sensor Kelembaban Berbasis Arduino Uno,” J. Tek. Komput. Amik Bsi, Vol. 6, No. 1, Pp. 21–30, 2020, Doi: 10.31294/Jtk.V4i2.
  6. M. I. H. Syaiful, Sukaris, Nur Fauziyah, Andi Rahmad Rahim, Azhar Prio Utomo, “Pemasangan Sensor Cahaya Otomatis Untuk Penerangan Jalan Umum Di Desa Karangsemanding,” Edikasimu (Journal Community Serv., Vol. 2, No. 2, Pp. 389–399, 2020, [Online]. Available: Http://Journal.Umg.Ac.Id/Index.Php/Dedikasimu/Article/View/1437/1067.
  7. A. F. Yulian Mirza, “Light Dependent Resistant(Ldr)Sebagai Pendeteksi Warna,” J. Jupiter, Vol. 8, No. 1, Pp. 39–45, 2016.
  8. R. O. W. Muhamad Yusvin Mustar, “Implementasi Sistem Monitoring Deteksi Hujan Dan Suhu Berbasis Sensor Secara Real Time,” J. Ilm. Semesta Tek., Vol. 20, No. 1, Pp. 20–28, 2017.
  9. P. A. Putra, “Jemuran Pakaian Otomatis Menggunakan Sensor Hujan Dan Sensor Ldr Berbasis Arduino,” Islam Riau, 2017.
  10. V. M. Naila Fauza*,Dina Syaflita,Safina Salma Ramadini, Jumira Annisa, Fitri Armala, Exsy Martinqa,Eka Dewi Susanti, “Rancang Bangun Prototipe Detektorhujan Sederhanaberbasis Raindropsensormenggunakan Buzzerdan Led,” J. Kumparan Fis., Vol. 4, No. 3, Pp. 163–168, 2021, [Online]. Available: Https://Ejournal.Unib.Ac.Id/Index.Php/Kumparan_Fisika/Article/View/16911/9431.
  11. Harry Yuliansyah, “Uji Kinerja Pengiriman Data Secara Wireless Menggunakan Modul Esp8266 Berbasis Rest Architecture,” Electr. – J. Rekayasa Dan Teknol. Elektro, Vol. 10, No. 2, Pp. 68–77, 2016, [Online]. Available: File:///C:/Users/Asus/Downloads/217-Article Text-258-1-10-20160715.Pdf.
  12. S. Samsugi, Ardiansyah, And D. Kastutara, “Arduino Dan Modul Wifi Esp8266 Sebagai Media Kendali Jarak Jauh Dengan Antarmuka Berbasis Android,” J. Teknoinfo, Vol. 12, No. 1, Pp. 23–27, 2018, [Online]. Available: File:///C:/Users/Asus/Downloads/42-204-1-Pb.Pdf.
  13. H. K. , Adharul Muttaqin, “Aplikasi Nodemcu Esp8266 Sebagai Pemantau Suhu Dan Kelembaban Ruang Data Center,” J. Eeccis, Vol. 15, No. 1, Pp. 23–28, 2021, [Online]. Available: Https://Www.Researchgate.Net/Publication/366872620_Aplikasi_Nodemcu_Esp8266_Sebagai_Pemantau_Suhu_Dan_Kelembaban_Ruang_Data_Center/Link/63b62e54a03100368a53bc86/Download?_Tp=Eyjjb250zxh0ijp7imzpcnn0ugfnzsi6inb1ymxpy2f0aw9uiiwicgfnzsi6inb1ymxpy2f0aw9uin19.