Article Sidebar
Main Article Content
Abstract
PT Asiana Garment is a garment company that has just opened its production site. The company also uses many tools and technologies to carry out the production process. Apart from the availability of tools and technology to achieve a smooth production process and increase the company's productivity level, ergonomic analysis of work posture is also needed. Work posture analysis was carried out on sewing and overlock operators. The results of the analysis using the REBA method showed that sewing operators had a moderate level of risk and needed improvement. The overlock operator was found to be at a high risk level and immediately required repairs. The improvement made was by redesigning the size of the chair used by the operator. The results of the design dimensions are for chair height 44.34 cm, chair length 33.8 cm, chair width 44.34 cm, chair back height 45.31 cm, and chair back width 53.92 cm
Keywords
Article Details
Copyright (c) 2023 Bimoseno Sepfrian, Garnet Filemon Waluyono, Febrian Rahmanda Saputra, Diana Novira
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
- This statement is a commitment from the author, to respect copyright, both in terms of quoting the work of others, as well as in the use of journal content.
- If needed, the author can send a statement of authenticity of the manuscript. With the receipt of an article by the Editor of Kreativasi - Journal of Community Empowerment, the article submitted has the copyright held by Kreativasi - Journal of Community Empowerment:
- Kreativasi - Journal of Community Empowerment has the right to reproduce and distribute articles that have been published in journals.
- The author is not permitted to publish the same article that has been published in this journal.
References
- Sritomo. 2006. Pengantar Teknik dan Manajemen Industri. Surabaya : penerbit Guna Widya.
- Rahmawanti, Nela Pima. 2014. Pengaruh Lingkungan Kerja Terhadap Kinerja Karyawan.Jurnal Administrasi Bisnis Vol. 8 Nomor 02 Maret 2014. Universitas Brawijaya Malang
- W. Susihono, Perbaikan Metode Kerja Berdasarkan Rapid Upper Limb Assesment (RULA) Pada Perusahaan Konstruksi Dan Fabrikasi, 2009.
- Buchori. (2007). Penyakit Akibat Kerja dan Penyakit Terkait Kerja. Universitas Sumatera Utara. Medan
- https://www.antropometriindonesia.org/index.php/detail/sub/5/5/0/produk. Antropometri Indonesia (2013).
- Guide, A. (2015). A Step by Step Rapid Entire Body Assessment (REBA). Applied Ergonomics, 31, 1-12.
- Kurnia, F., & Sobirin, M. (2020). Analisis Tingkat Kualitas Postur Pengemudi Becak Menggunakan Metode. Jurnal Engine: Energi, Manufaktur, Dan Material, 4(1), 1–5.
- Wignjosoebroto, Sritomo. 2008. Ergonomi, Studi Gerak dan Waktu. Guna Widya. Jakarta.
References
Sritomo. 2006. Pengantar Teknik dan Manajemen Industri. Surabaya : penerbit Guna Widya.
Rahmawanti, Nela Pima. 2014. Pengaruh Lingkungan Kerja Terhadap Kinerja Karyawan.Jurnal Administrasi Bisnis Vol. 8 Nomor 02 Maret 2014. Universitas Brawijaya Malang
W. Susihono, Perbaikan Metode Kerja Berdasarkan Rapid Upper Limb Assesment (RULA) Pada Perusahaan Konstruksi Dan Fabrikasi, 2009.
Buchori. (2007). Penyakit Akibat Kerja dan Penyakit Terkait Kerja. Universitas Sumatera Utara. Medan
https://www.antropometriindonesia.org/index.php/detail/sub/5/5/0/produk. Antropometri Indonesia (2013).
Guide, A. (2015). A Step by Step Rapid Entire Body Assessment (REBA). Applied Ergonomics, 31, 1-12.
Kurnia, F., & Sobirin, M. (2020). Analisis Tingkat Kualitas Postur Pengemudi Becak Menggunakan Metode. Jurnal Engine: Energi, Manufaktur, Dan Material, 4(1), 1–5.
Wignjosoebroto, Sritomo. 2008. Ergonomi, Studi Gerak dan Waktu. Guna Widya. Jakarta.