Bilah Samping Artikel

Telah diserahkan
October 27, 2020
Diterima
October 27, 2020
Diterbitkan
October 27, 2020
Unduh
PDF (English)
Statistik
Baca Penghitung : 494 Unduh : 1817

Isi Artikel Utama

Abstrak

PT. Pupuk Sriwidjaja uses several cooling systems, one of which is the Cooling Tower Fan 6p - 4051 - GB cooling system. The cooling system is used for production machines especially in turbines. This practical work report will discuss the effectiveness of Cooling Tower Fan 6p - 4051-GB, by processing data on the temperature of incoming water, outlet water temperature, wet blub temperature and flow rate of water, then the calculation of actual data is then compared with ideal conditions, thus will be known how the performance of the Cooling Tower Fan 6p - 4051 - GB. From the analysis the ideal effectiveness value is 66.66% while for the actual effectiveness value is 64.5301%, the effectiveness decreases 2.136%. This is due to heat transfer from the system to the environment or vice versa. From the results of the analysis it can be seen in the data that the water temperature comes out at 10:00 always increases compared to the other hours. This is because at 10.00 the sunlight directly leads to the cooling tower water reservoir and on rainy days the effectiveness of the cooling tower will increase

Rincian Artikel

Lisensi
Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.
Cara Mengutip
Triyansah, O., & Witanto, Y. (2020). EFEKTIVITAS COOLING TOWER FAN 6P - 4051 – GB. DI PT. PUPUK SRIWIDJAJA SEKTOR STG – BB, PALEMBANG, SUMATERA SELATAN. Rekayasa Mekanika: Jurnal Ilmiah Teknik Mesin, 4(1), 9–12. https://doi.org/10.33369/rekayasamekanika.v4i1.13272
Unduh Sitasi
Endnote/Zotero/Mendeley (RIS)
BibTeX

Referensi

  1. Awwaludin, M., Santosa, P., & Suwardiyono, “Perhitungan Kebutuhan Cooling Tower Pada Rancang Bangun Untai Uji Sistem Kendali Reaktor Riset”, Pusat Rekayasa Perangkat Nuklir – BATAN, 2013.
  2. Stoecker, Wilbert F., et al, “Refrigerasi Dan Pengkondisian Udara”, Jakarta: Penerbit Erlangga, 1982.
  3. TaufikAch,H.,Digdo Listyadi,S.,& Hary,S, “Analisis Beban Kalor Cooling Tower Induced Draft Counter Flow Dengan Bahan Pengisi Bamboo Wulung Jember”. Universitas Jember, 2014.
  4. Yopi Handoyo, “Analisis Performa Cooling Tower LCT 400 Pada PT.XYZ”, Tambun Bekasi: Universitas Islam 45 Bekasi, 2015.
  5. Siallagan.H., Pratam, “Analisis Kinerja Cooling Tower 8330 Pada Water Treatment Plant-2 PT. Krakatau Steel (Persero). Tbk”, Jakarta, Universitas Mercu Buana, 2015.