Article Sidebar
Main Article Content
Abstract
Bearing is one of the main components in the gear reducer pumping unit that plays an important role in supporting the performance of the output shaft. In working conditions, this component receives high loads that can affect deformation, stress, and bearing life. This study was conducted at PT Bukaka Teknik Utama with the aim of analyzing the total deformation, Von Mises stress, safety factor, and bearing life using Ansys Workbench R1 2024 Student software simulation. The analysis was carried out by creating a bearing geometry design using SolidWorks 2024, determining AISI 52100 material, meshing, giving radial and axial loading, and static analysis simulation. Specific data, such as 32230 SKF bearing specifications and load values, were used to ensure the accuracy of the results. The results of the analysis showed a maximum deformation value of 0.17348 mm, a maximum Von Mises stress of 76.579 MPa, a minimum safety factor of 5.876, and an average bearing life of 1.057 x 1012 hours. From the analysis that has been done, the results obtained are that the bearing life is too large due to the limited mesh size and the small loading given so that the results obtained are inaccurate. The results of the analysis indicate that the bearing is in a safe condition to support the given load. This study recommends improving the quality of meshing in the simulation to obtain more accurate results.
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.
References
- N. A. P. Harahap, F. Al Qadri, D. I. Y. Harahap, M. Situmorang, and S. Wulandari. 2023. Analisis Perkkembangan Industri Manufaktur Indonesia, El-Mal J. Kaji. Ekon. Bisnis Islam, vol. 4, no. 5, pp. 1444–1450, doi: 10.47467/elmal.v4i5.2918.
- F. Fitrianti. 2021. Perencanaan Pengangkatan Buatan dengan Sistim Pemompaan Berdasarkan Data Karakteristik Reservoir, J. Earth Energy Eng., vol. 2, no. 2, pp. 28–37, 2013, doi: 10.22549/jeee.v2i2.935.
- R. Annur, Analisa Gearbox Pada Fruit Elevator Pabrik, Univ. Muhammadiyah Sumatera Utara.
- A. Saputra. 2020. Optimasi Kinerja Pompa Sucker Rod Dengan Enggunaan Rod Pump Optimization Controller Erhadap Well Well Pounding dan Intermitten, [Online]. Available: https://repository.uir.ac.id/8102/
- M. R. A. Rachman and A. M. Sakti. 2020. Analisa Perbedaan Kekerasan Dan Kekuatan Tarik Baja S45C Dengan Perlakuan Quenching Dan Tempering Pada Media Udara, Air, dan Oli Untuk Aplikasi Poros Motor Roda Tiga, J. Tek. Mesin, vol. 08, no. 02, 89–94.
- F. Luntungan. 2013. Pembuatan Roda Gigi, Pembuatan Roda Gigi, pp. 1–39. Pendidikan Politeknik Kebudayaan Manado.
- A. Anjaswara. 2019. Analisa Kegagalan Pada Bearing Scraper Conveyor Untuk Loading Ramp Di PKS Dengan Siulasi ANSYS, Skripsi, 6–10.
- K. wijaya Kusuma. 2024. Analisis efek tekanan terhadap von mises stress pada high voltage jet electrode boiler, ITS.
References
N. A. P. Harahap, F. Al Qadri, D. I. Y. Harahap, M. Situmorang, and S. Wulandari. 2023. Analisis Perkkembangan Industri Manufaktur Indonesia, El-Mal J. Kaji. Ekon. Bisnis Islam, vol. 4, no. 5, pp. 1444–1450, doi: 10.47467/elmal.v4i5.2918.
F. Fitrianti. 2021. Perencanaan Pengangkatan Buatan dengan Sistim Pemompaan Berdasarkan Data Karakteristik Reservoir, J. Earth Energy Eng., vol. 2, no. 2, pp. 28–37, 2013, doi: 10.22549/jeee.v2i2.935.
R. Annur, Analisa Gearbox Pada Fruit Elevator Pabrik, Univ. Muhammadiyah Sumatera Utara.
A. Saputra. 2020. Optimasi Kinerja Pompa Sucker Rod Dengan Enggunaan Rod Pump Optimization Controller Erhadap Well Well Pounding dan Intermitten, [Online]. Available: https://repository.uir.ac.id/8102/
M. R. A. Rachman and A. M. Sakti. 2020. Analisa Perbedaan Kekerasan Dan Kekuatan Tarik Baja S45C Dengan Perlakuan Quenching Dan Tempering Pada Media Udara, Air, dan Oli Untuk Aplikasi Poros Motor Roda Tiga, J. Tek. Mesin, vol. 08, no. 02, 89–94.
F. Luntungan. 2013. Pembuatan Roda Gigi, Pembuatan Roda Gigi, pp. 1–39. Pendidikan Politeknik Kebudayaan Manado.
A. Anjaswara. 2019. Analisa Kegagalan Pada Bearing Scraper Conveyor Untuk Loading Ramp Di PKS Dengan Siulasi ANSYS, Skripsi, 6–10.
K. wijaya Kusuma. 2024. Analisis efek tekanan terhadap von mises stress pada high voltage jet electrode boiler, ITS.