Bilah Samping Artikel

Telah diserahkan
January 1, 2020
Diterima
April 11, 2020
Diterbitkan
April 28, 2020
Unduh
PDF (English)
Statistik
Baca Penghitung : 602 Unduh : 469

Unduhan

Data unduhan belum tersedia.

Isi Artikel Utama

Abstrak

ABSTRAK

 

Pada penelitian ini telah dikembangkan sebuah produk pakaian anti radiasi unisex sports wear menggunakan teknologi plasma pijar korona elektroda tip-plane. Plasma pijar korona dibangkitkan dengan listrik tegangan tinggi serta menggunakan elektroda asimetri  (lancip dan plat).Pembuatan pakaian anti radiasi menggunakan bahan rajut yang telah diplasma sertadilapisi dengan tinta konduktif. Hasil studi memperlihatkan bahwa metode pembuatan pakaian dengan plasma pijar korona telah berhasil mengurangi radiasi gelombang elektromagnetik.

 

Kata kunci: plasma pijar, pakaian unisex sportswear, elektroda tip-plane, anti radiasi

 

ABSTRACT

 

This paper describes the making of an anti-radiation smartphone unisex sportswear. The anti-radiation patch was developed by first modifiying the surface of the textile using atmospheric pressure plasma technology. The plasma corona discharge is generated by using a high voltage electricity withasymmetrical electrodes (tip and plane). The treated patch was than coated with graphite based conductive ink. The result of thisresearchindicates that an anti-radiation clothe patch was succesfully shield an electromagnetic radiation from a smartphone.

 

Keywords: plasma discharge, unisex sportswear, tip-plane electrode, electromagnetic shielding

Rincian Artikel

Lisensi

Authors who publish in this journal agree with the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

• Creative Commons Attribution-ShareAlike (CC BY-SA)

Creative Commons License

Jurnal Kumparan Fisika is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Cara Mengutip
Putra, V. G. V., Fitri, A. D., Purnama, I., & Mohamad, J. N. (2020). PROTOTIPE PAKAIAN ANTI RADIASI UNISEX SPORTSWEAR SMARTPHONE DENGAN PAPARAN RADIASI PLASMA PIJAR KORONA ELEKTRODA TIP- SILINDER. Jurnal Kumparan Fisika, 3(1 April), 19–24. https://doi.org/10.33369/jkf.3.1.19-24
Unduh Sitasi
Endnote/Zotero/Mendeley (RIS)
BibTeX

Referensi

  1. Shishoo, 2007, Plasma Technology For Textile, Woodhead Publishing, Cambridge.
  2. Usman, A.S, 2012,Peningkatan Daya Saing Industri TPT Melalui Standarisasi, Makalah Seminar Nasional Tekstil, Bandung.
  3. Yales, V. Kendalikan Konsumsi Energi Sektor Manufaktur. Surat Kabar KOMPAS, 18 April 2012, halaman 7
  4. Sjaifudin dan KH Sitohang, 2015, Rancang Bangun Prototip Mesin Plasma Tekstil Lucutan Korona pada Tekanan Atmosfir Skala Laboratorium, Balai Besar Tekstil, Bandung.
  5. Sjaifudin, Widodo, M., Muhlisin, Z., Nur, M, 2014,Modifikasi PermukaanBahanTekstil dengan Plasma Lucutan Korona, Prosiding Seminar Nasional Tekstil, 1-22.
  6. Rauscher, Perucca, Buyle, 2010, Plasma Technology for Hyperfunctionals Surfaces, Wiley-VCH, Weinheim.
  7. Lawrence, C A 2003, Fundamentals of Spun Yarn Technology, CRC Press, New York.
  8. Putra VGV, Dewanto A, Totong, 2016, Predicting Non Inertia Frame Related By Speed of Bobbin Compared by Speed of Rotor, Global Journal of Pure and Applied Mathematics, Vol 12.,No.5 pp. 4107-4114.
  9. Putra VGV, Maruto, G &Rosyid, M.F, 2017, New theoretical modeling for predicting yarn angle on OE yarn influenced by fibre movement on torus coordinate based on classical mechanics approach, Indian Journal of Fibre and Textile Research, Vol.42. pp. 359-363.
  10. M. Lieberman and A. Lichtenberg, 1994, Principles of Plasma Discharges and Materials Processing, John Wiley and Sons, New York.
  11. Boonchoat Paosawatyanyong, Satreerat Hodak, 2010, Hydrophobic and Hydrophilic Surface Nano-Modification of PET Fabric by Plasma Process, Journal of Nanoscience and Nanotechnology, Vol. 10, pp 7050–7054
  12. Safarova, V.; Tunak, M.; Truhlar, M.; Militky, J., 2016 A new method and apparatus for evaluating the electromagnetic shielding effectiveness of textiles.Text. Res. J., 86, 44–56
  13. Chen, H.C.; Lee, K.C.; Lin, J.H.; Koch, M, 2007,Comparison of electromagnetic shielding effectiveness properties of diverse conductive textiles via various measurement techniques. J. Mater. Process Techol. 192, 549–554
  14. Safarova, V.; Militky, J., 2012, Comparison of methods for evaluating the electromagnetic shielding of textiles. Fibers Text. 19, 50–55.
  15. Avloni, J.; Lau, R.; Ouyang, M.; Florio, L.; Henn, A.R.; Sparavigna, A, 2007, Shielding Effectiveness Evaluation of Metallized and Polypyrrole-Coated Fabrics.J. Thermoplast. Comp. Mater. 20, 241–254.
  16. Ozen, M.S.; Usta, I.; Yuksek, M.; Sancak, E.; Soin, N., 2018 Investigation of the Electromagnetic Shielding Effectiveness of Needle Punched Nonwoven Fabrics Produced from Stainless Steel and Carbon Fibres. Fibers Text.East. Eur.26, 94–100.
  17. MarComm, M., 2018, MILLENIALS, Fantasious x Loveable, Jakarta.
  18. Stillman, D. S., 2018,Generasi Z: Memahami Karakter Generasi Baru yang Akan Mengubah Dunia Kerja, PT Gramedia Pustaka Utama, Jakarta.