Main Article Content

Abstract

Construction operation modeling is carried out to understand  the behavior of the construction  operating system better. Further, construction operation modeling can provide an overview of productivity and duration of completion, as well as make it easier to solve problems from the perspective of the whole model. In this paper, we conduct a CYCLONE modeling simulation in construction operations on the PT Kereta Cepat Indonesia China (KCIC) Project to build the Jakarta-Bandung High Speed Railway (Jakarta- Bandung / KCJB Fast Train using CFG Pile Construction operations. The CFG Pile construction in section 3 is carried out for 21,000 points and has repeated construction work so that it can perform a cyclone method simulation using productivity analysis with the help of MATLAB software (Simulink-Simevent).  This simulation is executed for 30 cycles until the productivity results from the simulation have reached  steady state conditions.  Productivity result from both softwares produce almost the same results, respectively 0.675 from the COST program and 0.7427 from the MATLAB program. Based on the results of the sensitivity analysis, it can be concluded that the addition of resources such as number of drilling rigs, concrete pumps, and mixes truck will increase project productivity.

Article Details

How to Cite
Putri, A. A., Pratama , Y. A., Ginting, E., & Abrar, N. (2025). Analysis of Construction Operations for The Development of High Speed Railway Jakarta-Bandung (Project Team Section 3 using The Cement Fly- Ash Gravel Pile Methode). PENDIPA Journal of Science Education, 9(2), 530–536. https://doi.org/10.33369/pendipa.9.2.530-536

References

  1. Abduh, M. (2007). “The Development of Simulation Technology for Construction Operations”. (in Indonesian). Proc. of Seminar Nasional Teknik Sipil 2007. Univ. Maranatha. Bandung, Indonesia.
  2. AbouRizk, S. and Mohamed, Y. (2000). “Simphony: an integrated environment for construction simulation.” Proceedings of the 2000 Winter Simulation Conference, pp. 1907-1914. Phoenix, Arizona
  3. Amin, M., & Korniawan, T. (2016). Analisis Produktivitas Pekerjaan Instalasi Façade Curtain Wall Unitized System Pada Proyek High-Rise Building Dengan Metode Simulasi Operasi Konstruksi Berulang (Cyclone). Jurnal Rekayasa Sipil, Universitas Mercubuana.
  4. Construction Engineering and Management Purdue University, USA, https://engineering.purdue.edu/CEM/people/Personal/Halpin/Sim/CYCLONE/cyclone14.htm>
  5. Halpin, D.P.,& Riggs, L.S. (1992). Planning and Analysis of Construction Operations. John Wiley & Sons.
  6. Lubis, H.A. (2002). Analisis Efisiensi Transportasi Kereta Cepat sebagai Angkutan Massal. Jakarta: Universitas Indonesia.
  7. Octavia, Dyla Midya & Nasrul, Randi Saputra (2018). “Analisa Produktivitas Operasi Konstruksi Pekerjaan Lapis Pondasi Pada Proyek Jalan Menggunakan Simulasi Cyclone” Jurnal Teknik Sipil, Institut Teknologi Padang.
  8. Octavia, D.M., (2017). Pemodelan Estimasi Emisi Untuk Metoda Kerja Pengecoran Beton pada Bangunan Bertingkat Tinggi. Jurnal Momentum Institut Teknologi Padang. Vol 19, No. 2, Hal 12-19. ITP Press.