Main Article Content

Abstract

One of the industries that process latex and lumps into sheets with quality RSS 1, RSS 2, and cutting is PT. XYZ is located in Banjar Regency, South Kalimantan. In the production process, PT. XYZ produces more RSS 2 and cutting products compared to its main product, namely RSS 1. This is due to various factors that result in a decrease in product quality. The purpose of this study is to analyze the quality control of RSS by using statistical quality control (SQC). The tools used are check sheets, Pareto diagrams, P control charts, and cause and effect diagrams. Based on the research that has been done, it is found that a lot of data are outside the control limits of UCL and LCL, which are caused by the initial acceptance of raw materials and the smoking process that is not up to standard. Improvements that need to be made by PT. XYZ is by maintaining the cleanliness of raw materials and placing operators to research on the RSS processing process.

Article Details

Author Biographies

Nina Hairiyah, Agroindustry, Tanah Laut State Polytechnic

Agroindustry

Imron Musthofa, Tanah Laut State Polytechnic

Automotive Technology

Iis Sakhatun, Tanah Laut State Polytechnic

Agroindustry
How to Cite
Hairiyah, N., Musthofa, I., & Sakhatun, I. (2022). RIBBED SMOKE SHEET (RSS) PRODUCT QUALITY CONTROL USING STATISTICAL QUALITY CONTROL (SQC) AT PT. XYZ. Jurnal Agroindustri, 12(1), 21–28. https://doi.org/10.31186/j.agroindustri.12.1.21-28

References

  1. Anggraini, M., Sulastri., & Anggriawan, N.A. (2021). Analisis Pengendalian Kualitas Pengolahan Produk Karet Remah Sir 20 Dengan Pendekatan Statistical Quality Control. Jurnal Rekayasa, Teknologi, dan Sains, 3(1), 21-26. DOI: https://doi.org/10.33024/jrets.v3i1.1133
  2. Amrina, E. & Andryan, R. (2019). Assessing Wastes in Rubber Production Using Lean Manufacturing: A Case Study. IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA), pp. 328-332, doi: 10.1109/IEA.2019.8714925
  3. Anggraini, M., & Sidiq, A., (2020). Analisis Pengendalian Kualitas Produk Karet Sir 20 Dengan Menggunakan Peta Kendali P. Jurnal Rekayasa, Teknologi dan Sains. 4(1), 31-37. https://doi.org/10.33024/jrets.v4i1.2500
  4. Fakhri, F. Al, & Kamal, M. (2010). Analisis Pengendalian Kualitas Produksi di PT. Masscom Graphy dalam Upaya Mengendalikan Tingkat Kerusakan Produk Menggunakan Alat Bantu Statistik. Skripsi. Jurusan Manajemen. Fakultas Ekonomi. Universitas Diponegoro. Semarang.
  5. Handes, D., Susanto, K., Novita, L., & Wajong, A. M. R. (2013). Statistical quality control (SQC) pada proses produksi produk “E” di PT DYN, TBK. Inasea.
  6. Ishak, A., Siregar, K., Ginting, R., & Manik, A. (2020). Analysis Roofing Quality Control Using Statistical Quality Control (SQC) (Case Study: XYZ Company). IOP Conf. Ser.: Mater. Sci. Eng. 1003 012085
  7. Ilham, M. N., Brasit, N., & Dewi, R. S. (2012). Analisis Pengendalian Kualitas Produk dengan Menggunakan Statistical Processing Control (SPC) pada PT Bosowa Media Grafika (Tribun Timur). Skripsi. Jusan Manajemen. Fakultas Ekonomi dan Bisnis. Universitas Hasanuddin. Makassar.
  8. Mede, A. I. D., Roessali, W., & Nurfadillah S (2021). Analisis Risiko Produksi Karet Ribbed Smoked Sheet (Studi Kasus Di Kebun Merbuh, PTPN IX). Jurnal Litbang Provinsi Jawa Tengah, 19(1), 57-70. https://doi.org/10.36762/jurnaljateng.v19i1.868
  9. Oktavia, V., Suroso, E., & Utomo, T.P. (2014). Strategi Optimalisasi Bahan Baku Lateks Pada Industri Karet Jenis Ribbed Smoked Sheet (RSS). Jurnal Teknologi & Industri Hasil Pertanian, 19(2), 179-193. http://dx.doi.org/10.23960/jtihp.v19i2.179%20-%20213
  10. Parianti, E., Pratiwi., I., & Andalia, W. (2020). Pengendalian Kualitas Pada Produksi Karet Menggunakan Metode Six Sigma (Studi Kasus: PT. Sri Trang Lingga Indonesia (SLI). Integrasi Jurnal Ilmiah Teknik Industri, 1 (3), 24-28. https://doi.org/10.32502/js.v5i1.2967
  11. Ramadhani, G. S., Wilandari, Y., & Suparti. (2014). Analisis pengendalian kualitas menggunakan diagram kendali demerit (studi kasus produksi air minum dalam kemasan 240 ml di PT TIW). Jurnal Gaussian, 3(3), 401–410.
  12. A. L., Rucitra & A. U. F., Amna. (2021). Integration of Statistical Quality Control (SQC) and Fault Tree Analysis (FTA) in the quality control of resina colophonium production in Company X. IOP Conf. Ser.: Earth Environ. Sci. 924 012062
  13. Rully, T., & Nurrohman, A. (2013). Peranan Pengendalian Mutu Dengan Menggunakan Metode Sqc Dan Diagram Sebab Akibat Guna Mengurangu Produk Cacat Pada Ozi Aircraft Models. JIMFE (Jurnal Ilmiah Manajemen Fakultas Ekonomi), 5(2), 62-69. DOI: 10.34203/jimfev5i2.708
  14. Rustendi, I. (2013). Aplikasi statistical process control (SPC) dalam pengendalian variabilitas kuat tekan beton. Teodolita: Media Komunkasi Ilmiah Di Bidang Teknik.
  15. Said, M., Zahri, A., & Makmuri, M. (2021). Pengendalian Kualitas Crumb Rubber Dengan Menggunakan Statistical Quality Control. Jurnal Tekno, 15(1), 44-58.
  16. Yuliarto, & Putra, Y. S. (2014). Analisis quality control pada produksi susu sapi di CV Cita Nasional Getasan tahun 2014. AMONG MAKARTI, 7(14), 79–91.