Article Sidebar

Submitted
February 12, 2018
Published
October 10, 2017
Download
PDF
Statistic
Read Counter : 218 Download : 377

Main Article Content

Abstract

The objective so this research were: (1) to describe the profile of physical properties of sterilized FFB,(2) to find the model describing the performance so sterilization, and (3) to determine the right sterilization duration in respect to FFB ripening levels. This experiment was conducted in PT Bio Nusantara Teknologi Bengkulu by employing a horizontal type of sterilizer; done by following a completely randomized block design with the duration so sterilization as the blocks. Multiple-linear regression analysis was applied to describe the effect of the free variables on the physical property of FFB representing indicators efficacy of conducted sterilization operation. a result of the research indicated that size of weight, level of fruit maturity and duration of sterilization had effects on physical properties of sterilized FFB.  Model  of  prediction  describing   the  effect  were  as  follows: Y(Evaporation)=5,18-0,042X1-0,012X2+0,082X3; Y(Fruit lose,g)=1629,96+8,14X1-3,22X2-10,22X3 ; Y(Amount of kernel damaged) =-1,515-0,06X1+0,035X2 +0,115X3. The proper Sterilization time for a small, unripe FFB was 95 minutes with score 3; for a small, ripe FFB was 95 minutes with score 3; for a small, overripe FFB was 85 minutes with score 3.The appropriate sterilization duration for a big, unripe FFB was 105 minutes with score 3; for a big, ripe FFB was 105 minutes with score 3 and for big overripe FFB was 85 minutes with score 3.

Keywords

sterilization of palm oil model response result of sterilization scoring quality of steaming

Article Details

License

Authors who publish in this journal agree with the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Author Biography

Pandu Imam Subidbyo Adib, Dept. of Agric. Technology, Fac. of Agriculture, Univ. of Bengkulu

Graduate (Ph.D) Student
How to Cite
Adib, P. I. S., Santosa, S., Isril, B., & Anwar, K. (2017). STUDY ON PHYSICAL PROPERTIES OF STERILIZED FRESH FRUIT BUNCH (FFB) AT PT BIO NUSANTARA TEKNOLOGI BENGKULU. Jurnal Agroindustri, 7(2), 99–110. https://doi.org/10.31186/j.agroindustri.7.2.99-110
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Ditjen Perkebunan-Kementrian Pertanian RI. 2012. Pembangunan Pabrik Kelapa Sawit untuk Meningkatkan Produksi CPO, URL: http//www.ditjenbun@deptan.go.id.
  2. Farhana,Tg. and Kamarulzaman. 2009.
  3. Optimization condition for palm oil fruit sterilization process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.
  4. Kamal,M. 2006. The Study of Heat Penetration in Palm Oil Fruitlets by Developing a New Technique for Measuring Oil Content in Fruitlet during Sterilization Process.
  5. Maya,S. 2013. Microwave Sterilization of Oil Palm Fruits: Effect of Power, Temperature and D-value on Oil Qualit.Journal of Medical and Bioengineering Vol.2, No. 3, September.
  6. Naibaho, P. M. 1998. Teknologi Pen- golahan Kelapa Sawit. PPKS. Medan.
  7. Santosa. 2012. Buku Ajar Metodologi Penelitian. PT Penerbit IPB Press. Bogor.
  8. Sarwono, J. 2013. 12 Jurus Ampuh SPSS untuk Riset Skripsi. Penerbit Elexmedia Komputindo Kompas Gramedia Jakarta. Jakarta.
  9. Sari, F.D., M.Furqon, dan Alhamra. 2014. Pengolahan Tandan Buah Segar Sawit Menggunakan Teknologi Gelombang Mikro, Alternatif Pengganti Proses Perebusan. Balai Riset dan Standardisasi Industri Medan. Medan.
  10. Sawitindo. 2017. http://sawitindonesia.com/sajian- utama/pt-festo-indonesia-sistem- otomasi-sterilization/. [Diakses 12 Juli 2017].
  11. Singgih, S. 2013. Menguasai SPSS 21 di Era Informasi. PT.ELEK Media Komputindo. Jakarta.
  12. Sitepu, T. 2011. Analisa Kebutuhan Uap Pada Sterilizer Pabrik Kelapa Sawit Dengan Lama Perebusan 90 Menit. Jurnal Dinamis,Volume.II, No.8, Januari.
  13. Supriyono dan A. Bayu. 2008. Model Simulasi untuk Optimasi Penentuan Waktu Memasak Buah Kelapa Sawit dengan Logika Fuzzy. Seminar Nasional IV SDM Teknologi Nuklir Yogyakarta, 25-26 Agustus. ISSN
  14. -0176.
  15. Umudee, M.,M. Chongcheawchamnan, Kiatweerasakul, and C. Tongurai. 2013. Sterilization of Oil Palm Fresh Fruit using Microwave Technique. International Journal of Chemical Engineering and Applications, Vol. 4, No. 3.