Main Article Content

Abstract

The purpose of this research was to determine the percentage of each type of ‘roti manis’ physical damage, to identify factors causing the damages, and to determine whether the percentage amount of damage was whithin the business control limit. Types of damage observed were broken, too small in size, in appropriate form, over heated or burned.  Observation was conducted during 16 working days (one month) at Barokah Bakery in Lahat.  Result of the research showed that the broken damage was 1,31%; the too small in size was 1,1%; the unacceptable form was 0,98%; and no damage of over heat. Based on the causal effect analysis, it was found that the main factor causing ‘roti manis’s damages was caused by process inadequately. Result of diagram control analysis showed that the overall average damage was 3,4% with the upper limit was 5,2% and the lower limit was 1,6%. The percentage of the damage was considered high but it was within the company control limit of 2-4%

Keywords

physical damage control diagram

Article Details

Author Biographies

Ineke Kesuma Ningsih, Dept. of Agric. Technology, Fac. of Agriculture, Univ. of Bengkulu

Undergraduate Student

Fitri Electrika D. Surawan, Dept. of Agric. Technology, Fac. of Agriculture, Univ. of Bengkulu

Assistant Professor

Zulman Efendi, Dept. of Agric. Technology, Fac. of Agriculture, Univ. of Bengkulu

Assistant Professor
How to Cite
Ningsih, I. K., Surawan, F. E. D., & Efendi, Z. (2015). PHYSICAL QUALITY ANALYSIS OF ‘ROTI MANIS’ AT BAROKAH BAKERY IN LAHAT. Jurnal Agroindustri, 5(1), 20–35. https://doi.org/10.31186/j.agroindustri.5.1.20-35

References

  1. Ilham, M. N. 2012. Analisis pengendalian Kualitas Produk Dengan Mengunakan Statistical Processing Control (SPC) Pada PT. Bosowa Media Grafika (Tribun Timur). Skripsi Fakultas Ekonomi dan Bisnis Universitas Hasanuddin. Makasar.
  2. Lahatani. 2013. Manajemen Pengendalian Mutu Produksi Roti Melalui Pendekatan Statistical Quality control (SQC). Studi Kasus Pada perusahaan Roti Perusahaan Roti Rizki Kendari. Kendari.
  3. Prasetyo, F. T. 2013. Analisis Pengendalian Kualitas Produk Cat Envitex Dengan Menggunakan Metode P-Chart dan Fishbone Pada PT. Indaco Coatings Industry Karanganyar.Universitas Pendanaran Semarang. Semarang.
  4. Putriyana, T. D. 2008. Analisis Biaya Dan Profitabilitas Produksi Roti Pada Bella Bakery Di Pondok Gede Bekasi. Skripsi Fakultas Pertanian InstitutPertanianBogor. Bogor.
  5. Soekarno, T. 1990. Dasar-Dasar Pengawasan dan Standarisasi Mutu Pangan. ITB.Bogor.
  6. Syarbini, M. H. 2013. Referensi komplet A-Z Bakery. PT. Tiga Serangkai Pustaka Mandiri. Solo.
  7. Syarief, R. 1988. Pengetahuan Bahan Untuk Industri Pertanian. PT. Mediyatama Sarana Perkasa. Jakarta.
  8. Wahyudi. 2003. Memproduksi Roti. Direktorat Pendidikan Menengah Kejurusan. Direktorat Jenderal pendidikan Dasar dan Menengah. Departemen Pendidikan Nasional. Jakarta